EDI EDIFACT Release D21A MSCONS Metered services consumption report - Stedi (2024)

TBG1 Supply Chain

A metered services consumption report is a communication between trading parties, or their agents, providing consumption and where associated technical, information at a location(s) for a product(s) or service(s) where the supply is recorded using a meter(s).

Send feedback Share via email

Header

Position

Segment

Name

Max use

  1. 00010Message headerMandatory->Max 1

    A service segment starting and uniquely identifying a message. The message type code for the Metered services consumption report message is MSCONS. Note: Metered services consumption report messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 MSCONS 0052 D 0054 21A 0051 UN

  2. 00020Beginning of messageMandatory->Max 1

    A segment by which the sender must uniquely identify the metered services consumption report.

  3. 00030Date/time/periodMandatory->Max 9

    A segment specifying the dates, and when relevant, the times related to the whole message. The segment must be specified at least once to specify the message date as allocated by the sender.

  4. 00040CurrenciesConditional->Max 9

    A segment to specify currencies and relevant details for the rate of exchange.

  5. Segment group 1

    Repeat

    9

    1. 00060ReferenceMandatory->Max 1

      A segment for the inclusion of any references related to the complete report, e.g. invoice number, contract number.

    2. 00070Date/time/periodConditional->Max 9

      A segment specifying the date and where necessary the time of the reference detailed in the preceding RFF segment.

    1. 00090Name and addressMandatory->Max 1

      A segment to identify the party name and address, either by coded identification or in clear form. It is recommended that were possible only the coded form of the party identification should be specified, e.g. the buyer and seller are known to each other, thus only the coded identification is required.

    2. Segment group 3

      Repeat

      9

      1. 00110ReferenceMandatory->Max 1

        A segment for inclusion of any references related to the current party, e.g. fiscal number, government reference number, etc.

      2. 00120Date/time/periodConditional->Max 9

        A segment specifying the date and where necessary the time of the reference detailed in the preceding RFF segment.

    3. Segment group 4

      Repeat

      9

      1. 00140Contact informationMandatory->Max 1

        A segment to identify a person or department and their function, to whom communication should be directed.

      2. 00150Communication contactConditional->Max 9

        A segment specifying the communication channel and number for the specified contact.

Detail

Position

Segment

Name

Max use

  1. 00160Section controlMandatory->Max 1

    A segment placed at the start of the detail section to avoid segment collision.

  2. Segment group 5

    Repeat

    99999

    1. 00180Name and addressMandatory->Max 1

      A segment to identify the delivery party (premise) for which the following consumption information is being provided. It is recommended that where possible codes be used to identify the delivery party to facilitate the automatic processing.

    2. Segment group 6

      Repeat

      99999

      1. 00200Place/location identificationMandatory->Max 1

        A segment to allow the identification of the meter to which the consumption information relates. It is recommended that where possible codes be used to identify the delivery party to facilitate automatic processing.

      2. 00210Date/time/periodConditional->Max 9

        A segment to specify dates associated with the reading of the meter.

      3. Segment group 7

        Repeat

        99

        1. 00230ReferenceMandatory->Max 1

          A segment identifying any references related to the meter identified in the LOC segment (e.g. serial number).

        2. 00240Date/time/periodConditional->Max 9

          A segment to specify any dates associated with the currently referenced document.

      4. Segment group 8

        Repeat

        99

        1. 00260Characteristic/class idMandatory->Max 1

          A segment to describe the characteristics of the currently identified meter (e.g. sealed meter, banded meter).

        2. 00270Date/time/periodConditional->Max 99

          A segment specifying the date and where necessary the time related to the previously identified meter characteristics (e.g. installation date, connection date, meter banding date).

      5. Segment group 9

        Repeat

        99999

        1. 00290Line itemMandatory->Max 1

          A segment identifying the metered product or service for which consumption information is being provided.

        2. 00300Additional product idConditional->Max 9

          A segment providing additional identification to the product or service specified in the LIN segment (e.g. buyer's or supplier's product codes).

        3. 00310Item descriptionConditional->Max 9

          A segment for describing the metered product or service being reported. This segment should only be used for metered products or services that cannot be fully identified by an article number.

        4. 00320Price detailsConditional->Max 9

          A segment providing the unit price of the currently identified product or service.

        5. 00330Name and addressConditional->Max 9

          A segment to identify parties related to the supply of the service (e.g. party telephoned) or related to the party who supplied the service (e.g. a petrol filling station).

        6. 00340Monetary amountConditional->Max 9

          A segment to specify the total cost of the product or service currently being reported upon, e.g. the total cost of local telephone calls.

        7. Segment group 10

          Repeat

          9999

          1. 00360QuantityMandatory->Max 1

            A segment identifying the consumption details, e.g. opening meter read, consumption, adjustments (correction).

          2. 00370Date/time/periodConditional->Max 9

            A segment to specify dates related to the previously specified consumption information.

          3. 00380StatusConditional->Max 9

            A segment giving a status for the quantity, e.g. metered, estimated or corrected.

        8. Segment group 11

          Repeat

          99

          1. 00400Characteristic/class idMandatory->Max 1

            A segment used to describe the characteristics of the currently identified product or service (e.g. calorific values, chlorine content).

          2. 00410MeasurementsConditional->Max 99

            A segment enabling the indication of measurements related to the characteristics identified in the preceding CCI segment.

          3. 00420Date/time/periodConditional->Max 9

            A segment to specify dates related to the previously specified characteristic information.

Summary

Position

Segment

Name

Max use

  1. 00430Control totalConditional->Max 99

    A segment by which control totals may be sent by the sender for checking by the receiver.

  2. 00440Message trailerMandatory->Max 1

    A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.

EDI EDIFACT Release D21A MSCONS Metered services consumption report - Stedi (2024)
Top Articles
Latest Posts
Article information

Author: Delena Feil

Last Updated:

Views: 6082

Rating: 4.4 / 5 (65 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Delena Feil

Birthday: 1998-08-29

Address: 747 Lubowitz Run, Sidmouth, HI 90646-5543

Phone: +99513241752844

Job: Design Supervisor

Hobby: Digital arts, Lacemaking, Air sports, Running, Scouting, Shooting, Puzzles

Introduction: My name is Delena Feil, I am a clean, splendid, calm, fancy, jolly, bright, faithful person who loves writing and wants to share my knowledge and understanding with you.